SVG_Define_linear

Home

4D v16

SVG_Define_linear_gradient


SVG_Define_linear_gradient ( parentSVGObject ; id ; startColor ; endColor {; rotation {; spreadMethod {; x1 ; y1 ; x2 ; y2}{; startColorOffset ; endColorOffset}}} ) -> Funktionsergebnis

Parameter	Typ	Beschreibung
parentSVGObject	SVG_Ref	Reference of parent element
id	String	Name of gradient
startColor	String	Start color
endColor	String	End color
rotation	Ganzzahl	Rotation of gradient vector
spreadMethod	Text	Gradient spread method (pad, reflect or repeat)
x1	Zahl	x1 coordinate of gradient vector (If omitted = 0)
y1	Zahl	y1 coordinate of gradient vector (If omitted = 1)
x2	Zahl	x2 coordinate of gradient vector (If omitted = 0)
y2	Zahl	y2 coordinate of gradient vector (If omitted = 1)
startColorOffset	Zahl	Percentage value of offset for start color
endColorOffset	Zahl	Percentage value of offset for end color
Funktionsergebnis	String	Reference of gradient

Beschreibung

The SVG_Define_linear_gradient command sets a new linear gradient in the SVG container designated by parentSVGObject and returns its reference. If parentSVGObject is not an SVG document, an error is generated.

A gradient consists in a continuous progressive color transition from one color to another along a vector. Once specified, gradients are called on a given graphic element, while indicating whether this element must be filled or edged with the gradient called.

The id parameter specifies the name of the gradient. If an element with the same name exists, it will be replaced. This is the name that will be used to call the gradient each time a that a color expression is expected by using the syntax "url(#ID)".

The startColor and endColor parameters specify the colors used to begin and end the gradient.

The optional rotation parameter sets the position and direction of the gradient vector (see example).

The optional spreadMethod parameter defines the filling to be used when the gradient begins or ends within the bounds of the parentSVGObject. You can pass one of the following strings in this parameter:

"pad": use the terminal colors of the gradient to fill the remainder of the area.
"reflect": reflect the gradient pattern start-to-end, end-to-start, start-to-end, etc. continuously until the object is filled.
"repeat": repeat the gradient pattern start-to-end, start-to-end, start-to-end, etc. continuously until the object is filled.

If this parameter is omitted, the "pad" value effect is used.

The optional x1, y1, x2 and y2 parameters define the gradient vector. This vector provides the starting and ending points used by the rendering engine. You can pass percentages expressed as ratios (0...1) in these parameters.

Starting with V14, you can pass the optional startColorOffset and endColorOffset parameters to define the percentage value, respectively, of the start color and end color offset. You can pass either a real value < 1, or a value between 0 and 100 to set the percentage, i.e. "0.1" and/or "10" are both interpreted as 10%.

Passing a negative value is interpreted as 0% for the startColorOffset parameter and as 100% for the endColorOffset parameter. If you pass a value > 100, it is interpreted as 100%.

Beispiel 1

Draw 6 solid squares where each uses a linear gradient paint server while varying the rotation and direction of the gradient vector:

 $svg:=SVG_New

 

 SVG_Define_linear_gradient($svg;"demoGradient_1";"red";"yellow")

 SVG_New_rect($svg;10;10;90;90;0;0;"black";"url(#demoGradient_1)")

 SVG_New_text($svg;"rotation = 0\rrotation = 180";50;40;"";-1;-1;Align center)

 

 SVG_Define_linear_gradient($svg;"demoGradient_2";"red";"yellow";-180)

 SVG_New_rect($svg;110;10;90;90;0;0;"black";"url(#demoGradient_2)")

 SVG_New_text($svg;"rotation = -180";150;50;"";-1;-1;Align center)

 

 SVG_Define_linear_gradient($svg;"demoGradient_3";"red";"yellow";45)

 SVG_New_rect($svg;10;110;90;90;0;0;"black";"url(#demoGradient_3)")

 SVG_New_text($svg;"rotation = 45";50;150;"";-1;-1;Align center)

 

 SVG_Define_linear_gradient($svg;"demoGradient_4";"red";"yellow";-45)

 SVG_New_rect($svg;110;110;90;90;0;0;"black";"url(#demoGradient_4)")

 SVG_New_text($svg;"rotation = -45";150;150;"";-1;-1;Align center)

 

 SVG_Define_linear_gradient($svg;"demoGradient_5";"red";"yellow";90)

 SVG_New_rect($svg;10;210;90;90;0;0;"black";"url(#demoGradient_5)")

 SVG_New_text($svg;"rotation = 90";50;250;"";-1;-1;Align center)

 

 SVG_Define_linear_gradient($svg;"demoGradient_6";"red";"yellow";-90)

 SVG_New_rect($svg;110;210;90;90;0;0;"black";"url(#demoGradient_6)")

 SVG_New_text($svg;"rotation = -90";150;250;"";-1;-1;Align center)

 

  //Save document

 SVG_SAVE_AS_TEXT($svg;"test.svg")

  //Free up memory

 SVG_CLEAR($svg)

Beispiel 2

Example using the startColorOffset and endColorOffset parameters (added in v14):

$Dom_node:=SVG_Define_linear_gradient($Dom_svg;"clicked";"black:50";"black:20";-90;"reflect";0;80)

will give the definition:

<linearGradient id="clicked spreadMethod="reflect x1="0" x2="0" y1="1" y2="0">
    <stop offset="0%" stop-color="black" stop-opacity="0.5"/>
    <stop offset="80%" stop-color="black" stop-opacity="0.2"/>
</linearGradient>

Beispiel 3

This example illustrates the effect of the startColorOffset and endColorOffset parameters:

 $svg:=SVG_New

 

 SVG_Define_linear_gradient($svg;"demoGradient_1";"red";"yellow";-180;"reflect")

 SVG_New_rect($svg;10;10;90;90;0;0;"black";"url(#demoGradient_1)")

 SVG_New_text($svg;"offset=0/100";50;50;"";-1;-1;Align center)

 

 SVG_Define_linear_gradient($svg;"demoGradient_2";"red";"yellow";-180;"reflect";20;80)

 SVG_New_rect($svg;110;10;90;90;0;0;"black";"url(#demoGradient_2)")

 SVG_New_text($svg;"offset=20/80";150;50;"";-1;-1;Align center)

  //Save document

 SVG_SAVE_AS_TEXT($svg;"test2.svg")

  //Free up memory

 SVG_CLEAR($svg)

Siehe auch

SVG Colors
SVG_Define_radial_gradient