wr binding |
Entero largo |
26 |
Gets or sets the binding size expressed in the current document unit - corresponds to the 'Binding' area in the Preferences dialog box |
wr column width |
Entero largo |
59 |
Gets the column width expressed in the current document unit (this value cannot be set; it can only be read) |
wr columns spacing |
Entero largo |
25 |
Gets or sets the spacing value between each column expressed in the current document unit - corresponds to the 'Spacing' area of the Columns dialog box. |
wr data size |
Entero largo |
43 |
Gets the size of the document in bytes (this value cannot be set; it can only be read) |
wr dead left margin |
Entero largo |
39 |
Gets the non-printable area reserved by the printer on the left of the paper, expressed in the current document unit (this value cannot be set; it can only be read) (*) |
wr dead top margin |
Entero largo |
40 |
Gets the non-printable area reserved by the printer at the top of the paper, expressed in the current document unit (this value cannot be set; it can only be read) (*) |
wr default tab |
Entero largo |
22 |
Gets or sets the default "automatic" tab spacing expressed in the current document unit - corresponds to the 'Default Tab Spacing' area in the Preferences dialog box (by default 0.5 inches; 1.3 centimeters; 36 pixels) |
wr different left right pages |
Entero largo |
19 |
Gets or sets whether headers and footers are different between left and right pages - corresponds to the 'Different on left and right pages' option in the Preferences dialog box: wr similar (0) or wr different (1) |
wr different on first page |
Entero largo |
18 |
Gets or sets whether headers and footers are different on first page - corresponds to the 'Different on first page' option in the Preferences dialog box: wr similar (0) or wr different (1) |
wr draft mode |
Entero largo |
58 |
Gets or sets the document text entry mode: wr wysiwyg (0) or wr draft (1) |
wr first page |
Entero largo |
0 |
Gets or sets the first page number (1 by default). If you set, for example, the value 10, the 2nd page will be number 11, etc. |
wr first page bottom margin |
Entero largo |
53 |
Gets or sets the margin between the bottom of the first page body and the bottom edge of the paper expressed in the current document unit, use 'wr text bottom margin' for the other pages |
wr first page top margin |
Entero largo |
52 |
Gets or sets the margin between the top of the first page body and the top edge of the paper expressed in the current document unit, use 'wr text top margin' for the other pages |
wr footer 1st page bottom mg |
Entero largo |
57 |
Gets or sets the margin between the bottom of the first page footer and the bottom edge of the paper expressed in the current document unit, use 'wr footer bottom margin' for the other pages |
wr footer 1st page top margin |
Entero largo |
56 |
Gets or sets the margin between the top of the first page footer and the bottom edge of the paper expressed in the current document unit, use 'wr footer top margin' for the other pages |
wr footer bottom margin |
Entero largo |
36 |
Gets or sets the margin between the bottom of the page footer and the bottom edge of the paper expressed in the current document unit, use 'wr footer 1st page bottom mg' for the first page if different from others |
wr footer top margin |
Entero largo |
35 |
Gets or sets the margin between the top of the page footer and the bottom edge of the paper expressed in the current document unit, use 'wr footer 1st page top margin' for the first page if different from others |
wr header 1st page bottom mg |
Entero largo |
55 |
Gets or sets the margin between the bottom of the first page header and the top edge of the paper expressed in the current document unit, use 'wr header bottom margin' for the other pages |
wr header 1st page top margin |
Entero largo |
54 |
Gets or sets the margin between the top of the first page header and the top edge of the paper expressed in the current document unit, use 'wr header top margin' for the other pages |
wr header bottom margin |
Entero largo |
34 |
Gets or sets the margin between the bottom of the page header and the top edge of the paper expressed in the current document unit, use 'wr header 1st page bottom mg' for the first page if different from others |
wr header top margin |
Entero largo |
33 |
Gets or sets the margin between the top of the page header and the top edge of the paper expressed in the current document unit, use 'wr header 1st page top margin' for the first page if different from others |
wr horizontal splitter |
Entero largo |
45 |
Gets or sets the display status of the horizontal splitter: wr hidden (0) or wr displayed (1) |
wr language |
Entero largo |
23 |
Gets or sets the language associated with the document (American English = 1033, Australian English = 3081, English = 2057, Catalan = 1027, Danish = 1030, Dutch = 1043, Finnish = 1035, French = 1036, French Canadian = 3084, German = 1031, Italian = 1040, Norwegian Bokmal = 1044, Norwegian Nynorsk = 2068, Portuguese Brazil = 1046, Portuguese Iberian = 2070, Spanish = 1034, Swedish = 1053, Russian = 1049, Czech = 1029, Hungarian = 1038, Polish = 1045) |
wr links color |
Entero largo |
47 |
Gets or sets the color of the hyperlinks, while they are not visited |
wr number of columns |
Entero largo |
24 |
Gets or sets the number of columns of the document |
wr opposite pages |
Entero largo |
27 |
Gets or sets the opposite pages mode of the document - corresponds to the 'Opposite pages' option in the Preferences dialog box: wr single sided pages (0) or wr double sided pages (1) |
wr paper height |
Entero largo |
38 |
Gets or sets the paper height expressed in the current document unit (*) |
wr paper width |
Entero largo |
37 |
Gets or sets the paper width expressed in the current document unit (*) |
wr printable height |
Entero largo |
42 |
Gets the vertical printable area starting from the top left margin (this value cannot be set; it can only be read). The bottom dead margin equals the paper height; the top dead margin-the printable height. |
wr printable width |
Entero largo |
41 |
Gets the horizontal printable area starting from the dead left margin (this value cannot be set; it can only be read). The right dead margin equals the paper width; the left dead margin-the printable width. |
wr right first page |
Entero largo |
28 |
Gets or sets whether the first page is a left page or a right page - right page by default: wr left page (0) or wr right page (1) |
wr text bottom margin |
Entero largo |
32 |
Gets or sets the margin between the bottom of the page body and the bottom edge of the paper expressed in the current document unit, use 'wr first page bottom margin' for the first page if different from others |
wr text inside margin |
Entero largo |
29 |
Gets or sets the margin between the left side of the text and the left side of the paper for a right page, right sides for a left page, expressed in the current document unit (to be used in page mode) |
wr text left margin |
Entero largo |
29 |
Gets or sets the margin between the left side of the page and the left side of the paper expressed in the current document unit (to be used in normal mode) |
wr text outside margin |
Entero largo |
30 |
Gets or sets the margin between the right side of the text and the right side of the paper for a right page, left sides for a left page, expressed in the current document unit (to be used in page mode) |
wr text right margin |
Entero largo |
30 |
Gets or sets the margin between the right side of the page and the right side of the paper expressed in the current document unit (to be used in normal mode) |
wr text top margin |
Entero largo |
31 |
Gets or sets the margin between the top of the page body and the top edge of the paper expressed in the current document unit, use 'wr first page top margin' for the first page if different from others |
wr undo buffer size |
Entero largo |
44 |
Gets the size of the undo buffer in bytes (this value cannot be set; it can only be read) |
wr unit |
Entero largo |
21 |
Gets or sets the document current unit - corresponds to the 'Unit' pop up menu in the Preferences dialog box: wr centimeters (0), wr inches (1) or wr pixels (2) |
wr vertical splitter |
Entero largo |
46 |
Gets or sets the display status of the vertical splitter: wr hidden (0) or wr displayed (1) |
wr view borders palette |
Entero largo |
14 |
Gets or sets the display status of the borders toolbar: wr hidden (0) or wr displayed (1) |
wr view column separators |
Entero largo |
17 |
Gets or sets the presence of a vertical separator between columns in multi-columns mode - corresponds to the Vertical separator option in the Columns dialog box: wr hidden (absence) (0) or wr displayed (presence) (1) |
wr view first page footer |
Entero largo |
51 |
Gets or sets the display status of the first page footer: wr hidden (0) or wr displayed (1), use 'wr view footers' for the other pages |
wr view first page header |
Entero largo |
50 |
Gets or sets the display status of the first page header: wr hidden (0) or wr displayed (1), use 'wr view headers' for the other pages |
wr view footers |
Entero largo |
5 |
Gets or sets the display status of footers: wr hidden (0) or wr displayed (1), does not apply to the first page footer if it is different from others (use 'wr view first page footer') |
wr view format palette |
Entero largo |
12 |
Gets or sets the display status of the format toolbar: wr hidden (0) or wr displayed (1) |
wr view frame area |
Entero largo |
49 |
Gets or sets the presence of a frame around the area in the form: wr hidden (no frame) (0) or wr displayed (frame)(1) |
wr view frames |
Entero largo |
3 |
Gets or sets the display status of text frames: wr hidden (0) or wr displayed (1) |
wr view headers |
Entero largo |
4 |
Gets or sets the display status of headers: wr hidden (0) or wr displayed (1), does not apply to the first page header if it is different from others (use 'wr view first page header') |
wr view Hscrollbar |
Entero largo |
7 |
Gets or sets the display status of horizontal scrollbars: wr hidden (0) or wr displayed (1) |
wr view invisible chars |
Entero largo |
15 |
Gets or sets the display status of the invisible characters: wr hidden (0) or wr displayed (1) |
wr view menubar |
Entero largo |
10 |
Gets or sets the display status of the menu bar: wr hidden (0) or wr displayed (1) |
wr view mode |
Entero largo |
1 |
Gets or sets the document view mode: wr page mode (0) or wr normal mode (1) |
wr view pictures |
Entero largo |
6 |
Gets or sets the display status of pictures: wr hidden (0) or wr displayed (1) |
wr view references |
Entero largo |
16 |
Gets or sets the display status of the references: wr hidden (0) or wr displayed (1) |
wr view rulers |
Entero largo |
2 |
Gets or sets the display status of the ruler: wr hidden (0) or wr displayed (1) |
wr view standard palette |
Entero largo |
11 |
Gets or sets the display status of the standard tool palette: wr hidden (0) or wr displayed (1) |
wr view statusbar |
Entero largo |
9 |
Gets or sets the display status of the status bar: wr hidden (0) or wr displayed (1) |
wr view style palette |
Entero largo |
13 |
Gets or sets the display status of the style toolbar: wr hidden (0) or wr displayed (1) |
wr view Vscrollbar |
Entero largo |
8 |
Gets or sets the display status of vertical scrollbars: wr hidden (0) or wr displayed (1) |
wr visited links color |
Entero largo |
48 |
Gets or sets the color of the hyperlinks once they have been visited |
wr widow orphan |
Entero largo |
20 |
Gets or sets whether widows and orphans are taken into account - corresponds to the 'Widow and Orphan Control' option in the Preferences dialog box: wr ignored (0) or wr managed (1) |