4D Write v14

WR Document properties

Página Inicial

 
4D Write v14
WR Document properties

WR Document properties 

comentário 

(*) Quando define o tamanho do papel por programação, 4D Write considera que se está utilizando uma impressora "virtual". O programa fixa as margens mortas em zero e a área que pode ser impressa será igual ao tamanho do papel. Esta funcionalidade é útil para os documentos que não vão ser impressos.


 

Constante  Tipo Valor Comentário
wr binding  Inteiro longo 26 Gets or sets the binding size expressed in the current document unit - corresponds to the 'Binding' area in the Preferences dialog box
wr column width  Inteiro longo 59 Gets the column width expressed in the current document unit (this value cannot be set; it can only be read)
wr columns spacing  Inteiro longo 25 Gets or sets the spacing value between each column expressed in the current document unit - corresponds to the 'Spacing' area of the Columns dialog box.
wr data size  Inteiro longo 43 Gets the size of the document in bytes (this value cannot be set; it can only be read)
wr dead left margin  Inteiro longo 39 Gets the non-printable area reserved by the printer on the left of the paper, expressed in the current document unit (this value cannot be set; it can only be read) (*)
wr dead top margin  Inteiro longo 40 Gets the non-printable area reserved by the printer at the top of the paper, expressed in the current document unit (this value cannot be set; it can only be read) (*)
wr default tab  Inteiro longo 22 Gets or sets the default "automatic" tab spacing expressed in the current document unit - corresponds to the 'Default Tab Spacing' area in the Preferences dialog box (by default 0.5 inches; 1.3 centimeters; 36 pixels)
wr different left right pages  Inteiro longo 19 Gets or sets whether headers and footers are different between left and right pages - corresponds to the 'Different on left and right pages' option in the Preferences dialog box: wr similar (0) or wr different (1)
wr different on first page  Inteiro longo 18 Gets or sets whether headers and footers are different on first page - corresponds to the 'Different on first page' option in the Preferences dialog box: wr similar (0) or wr different (1)
wr draft mode  Inteiro longo 58 Gets or sets the document text entry mode: wr wysiwyg (0) or wr draft (1)
wr first page  Inteiro longo 0 Gets or sets the first page number (1 by default). If you set, for example, the value 10, the 2nd page will be number 11, etc.
wr first page bottom margin  Inteiro longo 53 Gets or sets the margin between the bottom of the first page body and the bottom edge of the paper expressed in the current document unit, use 'wr text bottom margin' for the other pages
wr first page top margin  Inteiro longo 52 Gets or sets the margin between the top of the first page body and the top edge of the paper expressed in the current document unit, use 'wr text top margin' for the other pages
wr footer 1st page bottom mg  Inteiro longo 57 Gets or sets the margin between the bottom of the first page footer and the bottom edge of the paper expressed in the current document unit, use 'wr footer bottom margin' for the other pages
wr footer 1st page top margin  Inteiro longo 56 Gets or sets the margin between the top of the first page footer and the bottom edge of the paper expressed in the current document unit, use 'wr footer top margin' for the other pages
wr footer bottom margin  Inteiro longo 36 Gets or sets the margin between the bottom of the page footer and the bottom edge of the paper expressed in the current document unit, use 'wr footer 1st page bottom mg' for the first page if different from others
wr footer top margin  Inteiro longo 35 Gets or sets the margin between the top of the page footer and the bottom edge of the paper expressed in the current document unit, use 'wr footer 1st page top margin' for the first page if different from others
wr header 1st page bottom mg  Inteiro longo 55 Gets or sets the margin between the bottom of the first page header and the top edge of the paper expressed in the current document unit, use 'wr header bottom margin' for the other pages
wr header 1st page top margin  Inteiro longo 54 Gets or sets the margin between the top of the first page header and the top edge of the paper expressed in the current document unit, use 'wr header top margin' for the other pages
wr header bottom margin  Inteiro longo 34 Gets or sets the margin between the bottom of the page header and the top edge of the paper expressed in the current document unit, use 'wr header 1st page bottom mg' for the first page if different from others
wr header top margin  Inteiro longo 33 Gets or sets the margin between the top of the page header and the top edge of the paper expressed in the current document unit, use 'wr header 1st page top margin' for the first page if different from others
wr horizontal splitter  Inteiro longo 45 Gets or sets the display status of the horizontal splitter: wr hidden (0) or wr displayed (1)
wr language  Inteiro longo 23 Gets or sets the language associated with the document (American English = 1033, Australian English = 3081, English = 2057, Catalan = 1027, Danish = 1030, Dutch = 1043, Finnish = 1035, French = 1036, French Canadian = 3084, German = 1031, Italian = 1040, Norwegian Bokmal = 1044, Norwegian Nynorsk = 2068, Portuguese Brazil = 1046, Portuguese Iberian = 2070, Spanish = 1034, Swedish = 1053, Russian = 1049, Czech = 1029, Hungarian = 1038, Polish = 1045)
wr links color  Inteiro longo 47 Gets or sets the color of the hyperlinks, while they are not visited
wr number of columns  Inteiro longo 24 Gets or sets the number of columns of the document
wr opposite pages  Inteiro longo 27 Gets or sets the opposite pages mode of the document - corresponds to the 'Opposite pages' option in the Preferences dialog box: wr single sided pages (0) or wr double sided pages (1)
wr paper height  Inteiro longo 38 Gets or sets the paper height expressed in the current document unit (*)
wr paper width  Inteiro longo 37 Gets or sets the paper width expressed in the current document unit (*)
wr printable height  Inteiro longo 42 Gets the vertical printable area starting from the top left margin (this value cannot be set; it can only be read). The bottom dead margin equals the paper height; the top dead margin-the printable height.
wr printable width  Inteiro longo 41 Gets the horizontal printable area starting from the dead left margin (this value cannot be set; it can only be read). The right dead margin equals the paper width; the left dead margin-the printable width.
wr right first page  Inteiro longo 28 Gets or sets whether the first page is a left page or a right page - right page by default: wr left page (0) or wr right page (1)
wr text bottom margin  Inteiro longo 32 Gets or sets the margin between the bottom of the page body and the bottom edge of the paper expressed in the current document unit, use 'wr first page bottom margin' for the first page if different from others
wr text inside margin  Inteiro longo 29 Gets or sets the margin between the left side of the text and the left side of the paper for a right page, right sides for a left page, expressed in the current document unit (to be used in page mode)
wr text left margin  Inteiro longo 29 Gets or sets the margin between the left side of the page and the left side of the paper expressed in the current document unit (to be used in normal mode)
wr text outside margin  Inteiro longo 30 Gets or sets the margin between the right side of the text and the right side of the paper for a right page, left sides for a left page, expressed in the current document unit (to be used in page mode)
wr text right margin  Inteiro longo 30 Gets or sets the margin between the right side of the page and the right side of the paper expressed in the current document unit (to be used in normal mode)
wr text top margin  Inteiro longo 31 Gets or sets the margin between the top of the page body and the top edge of the paper expressed in the current document unit, use 'wr first page top margin' for the first page if different from others
wr undo buffer size  Inteiro longo 44 Gets the size of the undo buffer in bytes (this value cannot be set; it can only be read)
wr unit  Inteiro longo 21 Gets or sets the document current unit - corresponds to the 'Unit' pop up menu in the Preferences dialog box: wr centimeters (0), wr inches (1) or wr pixels (2)
wr vertical splitter  Inteiro longo 46 Gets or sets the display status of the vertical splitter: wr hidden (0) or wr displayed (1)
wr view borders palette  Inteiro longo 14 Gets or sets the display status of the borders toolbar: wr hidden (0) or wr displayed (1)
wr view column separators  Inteiro longo 17 Gets or sets the presence of a vertical separator between columns in multi-columns mode - corresponds to the Vertical separator option in the Columns dialog box: wr hidden (absence) (0) or wr displayed (presence) (1)
wr view first page footer  Inteiro longo 51 Gets or sets the display status of the first page footer: wr hidden (0) or wr displayed (1), use 'wr view footers' for the other pages
wr view first page header  Inteiro longo 50 Gets or sets the display status of the first page header: wr hidden (0) or wr displayed (1), use 'wr view headers' for the other pages
wr view footers  Inteiro longo 5 Gets or sets the display status of footers: wr hidden (0) or wr displayed (1), does not apply to the first page footer if it is different from others (use 'wr view first page footer')
wr view format palette  Inteiro longo 12 Gets or sets the display status of the format toolbar: wr hidden (0) or wr displayed (1)
wr view frame area  Inteiro longo 49 Gets or sets the presence of a frame around the area in the form: wr hidden (no frame) (0) or wr displayed (frame)(1)
wr view frames  Inteiro longo 3 Gets or sets the display status of text frames: wr hidden (0) or wr displayed (1)
wr view headers  Inteiro longo 4 Gets or sets the display status of headers: wr hidden (0) or wr displayed (1), does not apply to the first page header if it is different from others (use 'wr view first page header')
wr view Hscrollbar  Inteiro longo 7 Gets or sets the display status of horizontal scrollbars: wr hidden (0) or wr displayed (1)
wr view invisible chars  Inteiro longo 15 Gets or sets the display status of the invisible characters: wr hidden (0) or wr displayed (1)
wr view menubar  Inteiro longo 10 Gets or sets the display status of the menu bar: wr hidden (0) or wr displayed (1)
wr view mode  Inteiro longo 1 Gets or sets the document view mode: wr page mode (0) or wr normal mode (1)
wr view pictures  Inteiro longo 6 Gets or sets the display status of pictures: wr hidden (0) or wr displayed (1)
wr view references  Inteiro longo 16 Gets or sets the display status of the references: wr hidden (0) or wr displayed (1)
wr view rulers  Inteiro longo 2 Gets or sets the display status of the ruler: wr hidden (0) or wr displayed (1)
wr view standard palette  Inteiro longo 11 Gets or sets the display status of the standard tool palette: wr hidden (0) or wr displayed (1)
wr view statusbar  Inteiro longo 9 Gets or sets the display status of the status bar: wr hidden (0) or wr displayed (1)
wr view style palette  Inteiro longo 13 Gets or sets the display status of the style toolbar: wr hidden (0) or wr displayed (1)
wr view Vscrollbar  Inteiro longo 8 Gets or sets the display status of vertical scrollbars: wr hidden (0) or wr displayed (1)
wr visited links color  Inteiro longo 48 Gets or sets the color of the hyperlinks once they have been visited
wr widow orphan  Inteiro longo 20 Gets or sets whether widows and orphans are taken into account - corresponds to the 'Widow and Orphan Control' option in the Preferences dialog box: wr ignored (0) or wr managed (1)
 
PROPRIEDADES 

Produto: 4D Write
Tema: Lista de temas de constantes

 
VER TAMBÉM 

WR SET DOC PROPERTY

 
ARTICLE USAGE

4D Write - Linguagem ( 4D Write v11.6)
4D Write - Linguagem ( 4D Write v12)
4D Write - Linguagem ( 4D v13)
4D Write - Linguagem ( 4D Write v14 R2)
4D Write - Linguagem ( 4D Write v14)
4D Write - Linguagem ( 4D Write v14 R3)
4D Write - Linguagem ( 4D Write v14 R4)