4D Write v16
WR SET DOC PROPERTY
4D Write v16
WR SET DOC PROPERTY
WR SET DOC PROPERTY
| WR SET DOC PROPERTY ( area ; property ; value ) | ||||||||
| Parameter | Type | Description | ||||||
| area | Longint |
|
4D Write area | |||||
| property | Integer |
|
Number of the property to set | |||||
| value | Longint |
|
Value for the selected property | |||||
The WR SET DOC PROPERTY command allows you to modify the document properties in the 4D Write area referenced by area.
The meaning given to the value parameter depends on the property value used. property and value can be set using constants.
The constants of the “WR Document properties” theme are described below.
The following constants can be used with WR SET DOC PROPERTY and WR Get doc property. You can also use the constants of the “WR Parameters” theme to set the values:
| Constant | Type | Value | Comment |
| wr first page | Longint | 0 | Gets or sets the first page number (1 by default). If you set, for example, the value 10, the 2nd page will be number 11, etc. |
| wr view mode | Longint | 1 | Gets or sets the document view mode: wr page mode (0) or wr normal mode (1) |
| wr view rulers | Longint | 2 | Gets or sets the display status of the ruler: wr hidden (0) or wr displayed (1) |
| wr view frames | Longint | 3 | Gets or sets the display status of text frames: wr hidden (0) or wr displayed (1) |
| wr view headers | Longint | 4 | Gets or sets the display status of headers: wr hidden (0) or wr displayed (1), does not apply to the first page header if it is different from others (use 'wr view first page header') |
| wr view footers | Longint | 5 | Gets or sets the display status of footers: wr hidden (0) or wr displayed (1), does not apply to the first page footer if it is different from others (use 'wr view first page footer') |
| wr view pictures | Longint | 6 | Gets or sets the display status of pictures: wr hidden (0) or wr displayed (1) |
| wr view Hscrollbar | Longint | 7 | Gets or sets the display status of horizontal scrollbars: wr hidden (0) or wr displayed (1) |
| wr view Vscrollbar | Longint | 8 | Gets or sets the display status of vertical scrollbars: wr hidden (0) or wr displayed (1) |
| wr view statusbar | Longint | 9 | Gets or sets the display status of the status bar: wr hidden (0) or wr displayed (1) |
| wr view menubar | Longint | 10 | Gets or sets the display status of the menu bar: wr hidden (0) or wr displayed (1) |
| wr view standard palette | Longint | 11 | Gets or sets the display status of the standard tool palette: wr hidden (0) or wr displayed (1) |
| wr view format palette | Longint | 12 | Gets or sets the display status of the format toolbar: wr hidden (0) or wr displayed (1) |
| wr view style palette | Longint | 13 | Gets or sets the display status of the style toolbar: wr hidden (0) or wr displayed (1) |
| wr view borders palette | Longint | 14 | Gets or sets the display status of the borders toolbar: wr hidden (0) or wr displayed (1) |
| wr view invisible chars | Longint | 15 | Gets or sets the display status of the invisible characters: wr hidden (0) or wr displayed (1) |
| wr view references | Longint | 16 | Gets or sets the display status of the references: wr hidden (0) or wr displayed (1) |
| wr view column separators | Longint | 17 | Gets or sets the presence of a vertical separator between columns in multi-columns mode - corresponds to the Vertical separator option in the Columns dialog box: wr hidden (absence) (0) or wr displayed (presence) (1) |
| wr different on first page | Longint | 18 | Gets or sets whether headers and footers are different on first page - corresponds to the 'Different on first page' option in the Preferences dialog box: wr similar (0) or wr different (1) |
| wr different left right pages | Longint | 19 | Gets or sets whether headers and footers are different between left and right pages - corresponds to the 'Different on left and right pages' option in the Preferences dialog box: wr similar (0) or wr different (1) |
| wr widow orphan | Longint | 20 | Gets or sets whether widows and orphans are taken into account - corresponds to the 'Widow and Orphan Control' option in the Preferences dialog box: wr ignored (0) or wr managed (1) |
| wr unit | Longint | 21 | Gets or sets the document current unit - corresponds to the 'Unit' pop up menu in the Preferences dialog box: wr centimeters (0), wr inches (1) or wr pixels (2) |
| wr default tab | Longint | 22 | Gets or sets the default "automatic" tab spacing expressed in the current document unit - corresponds to the 'Default Tab Spacing' area in the Preferences dialog box (by default 0.5 inches; 1.3 centimeters; 36 pixels) |
| wr language | Longint | 23 | Gets or sets the language associated with the document (American English = 1033, Australian English = 3081, English = 2057, Catalan = 1027, Danish = 1030, Dutch = 1043, Finnish = 1035, French = 1036, French Canadian = 3084, German = 1031, Italian = 1040, Norwegian Bokmal = 1044, Norwegian Nynorsk = 2068, Portuguese Brazil = 1046, Portuguese Iberian = 2070, Spanish = 1034, Swedish = 1053, Russian = 1049, Czech = 1029, Hungarian = 1038, Polish = 1045) |
| wr number of columns | Longint | 24 | Gets or sets the number of columns of the document |
| wr columns spacing | Longint | 25 | Gets or sets the spacing value between each column expressed in the current document unit - corresponds to the 'Spacing' area of the Columns dialog box. |
| wr binding | Longint | 26 | Gets or sets the binding size expressed in the current document unit - corresponds to the 'Binding' area in the Preferences dialog box |
| wr opposite pages | Longint | 27 | Gets or sets the opposite pages mode of the document - corresponds to the 'Opposite pages' option in the Preferences dialog box: wr single sided pages (0) or wr double sided pages (1) |
| wr right first page | Longint | 28 | Gets or sets whether the first page is a left page or a right page - right page by default: wr left page (0) or wr right page (1) |
| wr text inside margin | Longint | 29 | Gets or sets the margin between the left side of the text and the left side of the paper for a right page, right sides for a left page, expressed in the current document unit (to be used in page mode) |
| wr text left margin | Longint | 29 | Gets or sets the margin between the left side of the page and the left side of the paper expressed in the current document unit (to be used in normal mode) |
| wr text outside margin | Longint | 30 | Gets or sets the margin between the right side of the text and the right side of the paper for a right page, left sides for a left page, expressed in the current document unit (to be used in page mode) |
| wr text right margin | Longint | 30 | Gets or sets the margin between the right side of the page and the right side of the paper expressed in the current document unit (to be used in normal mode) |
If the 'Different on first page' option in the Preferences dialog box has been selected, the following constants should be used for all pages except for the first one:
| Constant | Type | Value | Comment |
| wr text top margin | Longint | 31 | Gets or sets the margin between the top of the page body and the top edge of the paper expressed in the current document unit, use 'wr first page top margin' for the first page if different from others |
| wr text bottom margin | Longint | 32 | Gets or sets the margin between the bottom of the page body and the bottom edge of the paper expressed in the current document unit, use 'wr first page bottom margin' for the first page if different from others |
| wr header top margin | Longint | 33 | Gets or sets the margin between the top of the page header and the top edge of the paper expressed in the current document unit, use 'wr header 1st page top margin' for the first page if different from others |
| wr header bottom margin | Longint | 34 | Gets or sets the margin between the bottom of the page header and the top edge of the paper expressed in the current document unit, use 'wr header 1st page bottom mg' for the first page if different from others |
| wr footer top margin | Longint | 35 | Gets or sets the margin between the top of the page footer and the bottom edge of the paper expressed in the current document unit, use 'wr footer 1st page top margin' for the first page if different from others |
| wr footer bottom margin | Longint | 36 | Gets or sets the margin between the bottom of the page footer and the bottom edge of the paper expressed in the current document unit, use 'wr footer 1st page bottom mg' for the first page if different from others |
| wr paper width | Longint | 37 | Gets or sets the paper width expressed in the current document unit (*) |
| wr paper height | Longint | 38 | Gets or sets the paper height expressed in the current document unit (*) |
| wr dead left margin | Longint | 39 | Gets the non-printable area reserved by the printer on the left of the paper, expressed in the current document unit (this value cannot be set; it can only be read) (*) |
| wr dead top margin | Longint | 40 | Gets the non-printable area reserved by the printer at the top of the paper, expressed in the current document unit (this value cannot be set; it can only be read) (*) |
| wr printable width | Longint | 41 | Gets the horizontal printable area starting from the dead left margin (this value cannot be set; it can only be read). The right dead margin equals the paper width; the left dead margin-the printable width. |
| wr printable height | Longint | 42 | Gets the vertical printable area starting from the top left margin (this value cannot be set; it can only be read). The bottom dead margin equals the paper height; the top dead margin-the printable height. |
| wr data size | Longint | 43 | Gets the size of the document in bytes (this value cannot be set; it can only be read) |
| wr undo buffer size | Longint | 44 | Gets the size of the undo buffer in bytes (this value cannot be set; it can only be read) |
| wr horizontal splitter | Longint | 45 | Gets or sets the display status of the horizontal splitter: wr hidden (0) or wr displayed (1) |
| wr vertical splitter | Longint | 46 | Gets or sets the display status of the vertical splitter: wr hidden (0) or wr displayed (1) |
| wr links color | Longint | 47 | Gets or sets the color of the hyperlinks, while they are not visited |
| wr visited links color | Longint | 48 | Gets or sets the color of the hyperlinks once they have been visited |
| wr view frame area | Longint | 49 | Gets or sets the presence of a frame around the area in the form: wr hidden (no frame) (0) or wr displayed (frame)(1) |
(*) When you set the paper size programmatically, 4D Write will consider that a "virtual" printer device is used. The program will set the dead margins to zero and the printable area will be equal to the paper size. This feature is useful for documents which are not intended to be printed.
The following constants (50 to 59)should be used for the first page of your document when the 'Different on first page' option in the Preferences dialog box has been set.
| Constant | Type | Value | Comment |
| wr view first page header | Longint | 50 | Gets or sets the display status of the first page header: wr hidden (0) or wr displayed (1), use 'wr view headers' for the other pages |
| wr view first page footer | Longint | 51 | Gets or sets the display status of the first page footer: wr hidden (0) or wr displayed (1), use 'wr view footers' for the other pages |
| wr first page top margin | Longint | 52 | Gets or sets the margin between the top of the first page body and the top edge of the paper expressed in the current document unit, use 'wr text top margin' for the other pages |
| wr first page bottom margin | Longint | 53 | Gets or sets the margin between the bottom of the first page body and the bottom edge of the paper expressed in the current document unit, use 'wr text bottom margin' for the other pages |
| wr header 1st page top margin | Longint | 54 | Gets or sets the margin between the top of the first page header and the top edge of the paper expressed in the current document unit, use 'wr header top margin' for the other pages |
| wr header 1st page bottom mg | Longint | 55 | Gets or sets the margin between the bottom of the first page header and the top edge of the paper expressed in the current document unit, use 'wr header bottom margin' for the other pages |
| wr footer 1st page top margin | Longint | 56 | Gets or sets the margin between the top of the first page footer and the bottom edge of the paper expressed in the current document unit, use 'wr footer top margin' for the other pages |
| wr footer 1st page bottom mg | Longint | 57 | Gets or sets the margin between the bottom of the first page footer and the bottom edge of the paper expressed in the current document unit, use 'wr footer bottom margin' for the other pages |
| wr draft mode | Longint | 58 | Gets or sets the document text entry mode: wr wysiwyg (0) or wr draft (1) |
| wr column width | Longint | 59 | Gets the column width expressed in the current document unit (this value cannot be set; it can only be read) |
You want to display a 4D Write area on screen without its menus and rulers:
If(Form event=On Load)
WR SET DOC PROPERTY(Area;wr view menubar;wr hidden)
WR SET DOC PROPERTY(Area;wr view rulers;wr hidden)
End ifThis method allows the user to display or hide the scroll bars:
C_LONGINT(ScrollStatus)
ScrollStatus:=WR Get doc property(Area;wr Hscrollbar) `Constant=7
ScrollStatus:=ScrollStatus+WR Get doc property(Area;wr Vscrollbar) `Constant=8
If(ScrollStatus>0)
CONFIRM("At least one scroll bar is displayed, do you want to hide them?")
If(OK=1)
WR SET DOC PROPERTY(Area;wr Hscrollbar;wr hidden)
WR SET DOC PROPERTY(Area;wr Vscrollbar;wr hidden)
End if
Else
CONFIRM("Scroll bars are hidden, do you want to display them?")
If(OK=1)
WR SET DOC PROPERTY(Area;wr Hscrollbar;wr displayed)
WR SET DOC PROPERTY(Area;wr Vscrollbar;wr displayed)
End if
End if
See also
PROPERTIES
Product: 4D Write
Theme: WR Area Control
Number:
89481
HISTORY
Modified: 4D Write 6.5
ARTICLE USAGE
4D Write Language ( 4D Write v16)
© 1985-2018 4D SAS / 4D, Inc. All rights reserved.