4D v14.3

Print form

Home

 
4D v14.3
Print form

Print form 


 

Print form ( {aTable ;} form {; area1 {; area2}} ) -> Function result 
Parameter Type   Description
aTable  Table in Table owning the form, or Default table, if omitted
form  String in Form to print
area1  Longint in Print marker, or Beginning area (if area2 is specified)
area2  Longint in Ending area (if area1 specified)
Function result  Longint in Height of printed section

Print form simply prints form with the current values of fields and variables of aTable. It is usually used to print very complex reports that require complete control over the printing process. Print form does not do any record processing, break processing or page breaks. These operations are your responsibility. Print form prints fields and variables in a fixed size frame only.

Since Print form does not issue a page break after printing the form, it is easy to combine different forms on the same page. Thus, Print form is perfect for complex printing tasks that involve different tables and different forms. To force a page break between forms, use the PAGE BREAK command. In order to carry printing over to the next page for a form whose height is greater than the available space, call the CANCEL command before the PAGE BREAK command.

Three different syntaxes may be used:

  • Detail area printing

Syntax:

 height:=Print form(myTable;myForm)

In this case, Print form only prints the Detail area (the area between the Header line and the Detail line) of the form.

  • Form area printing

Syntax:

 height:=Print form(myTable;myForm;marker)

In this case, the command will print the section designated by the marker. Pass one of the constants of the Form Area theme in the marker parameter:

Constant Type Value
Form break0 Longint 300
Form break1 Longint 301
Form break2 Longint 302
Form break3 Longint 303
Form break4 Longint 304
Form break5 Longint 305
Form break6 Longint 306
Form break7 Longint 307
Form break8 Longint 308
Form break9 Longint 309
Form detail Longint 0
Form footer Longint 100
Form header Longint 200
Form header1 Longint 201
Form header10 Longint 210
Form header2 Longint 202
Form header3 Longint 203
Form header4 Longint 204
Form header5 Longint 205
Form header6 Longint 206
Form header7 Longint 207
Form header8 Longint 208
Form header9 Longint 209
  • Section printing

Syntax:

 height:=Print form(myTable;myForm;areaStart;areaEnd)

In this case, the command will print the section included between the areaStart and areaEnd parameters. The values entered must be expressed in pixels.

The value returned by Print form indicates the height of the printable area. This value will be automatically taken into account by the Get printed height command.

The printer dialog boxes do not appear when you use Print form. The report does not use the print settings that were assigned to the form in the Design environment. There are two ways to specify the print settings before issuing a series of calls to Print form:

  • Call PRINT SETTINGS. In this case, you let the user choose the settings.
  • Call PAGE SETUP. In this case, print settings are specified programmatically.

Print form builds each printed page in memory. Each page is printed when the page in memory is full or when you call PAGE BREAK. To ensure the printing of the last page after any use of Print form, you must conclude with the PAGE BREAK command (except in the context of an OPEN PRINTING JOB, see note). Otherwise, if the last page is not full, it stays in memory and is not printed.

Warning: If the command is called in the context of a printing job opened with OPEN PRINTING JOB, you must NOT call PAGE BREAK for the last page because it is automatically printed by the CLOSE PRINTING JOB command. If you call PAGE BREAK in this case, a blank page is printed.

This command prints external areas and objects (for example, 4D Write or 4D View areas). The area is reset for each execution of the command.

Warning: Subforms are not printed with Print form. To print only one form with such objects, use PRINT RECORD instead.

Print form generates only one On Printing Detail event for the form method.

4D Server: This command can be executed on 4D Server within the framework of a stored procedure. In this context:

  • Make sure that no dialog box appears on the server machine (except for a specific requirement).
  • In the case of a problem concerning the printer (out of paper, printer disconnected, etc.), no error message is generated.

The following example performs as a PRINT SELECTION command would. However, the report uses one of two different forms, depending on whether the record is for a check or a deposit:

 QUERY([Register]` Select the records
 If(OK=1)
    ORDER BY([Register]` Sort the records
    If(OK=1)
       PRINT SETTINGS ` Display Printing dialog boxes
       If(OK=1)
          For($vlRecord;1;Records in selection([Register]))
             If([Register]Type ="Check")
                Print form([Register];"Check Out") ` Use one form for checks
             Else
                Print form([Register];"Deposit Out") ` Use another form for deposits
             End if
             NEXT RECORD([Register])
          End for
          PAGE BREAK ` Make sure the last page is printed
       End if
    End if
 End if

Refer to the example of the SET PRINT MARKER command.

 
PROPERTIES 

Product: 4D
Theme: Printing
Number: 5

Different in remote mode

 
HISTORY 

Modified: 4D 2004.5

 
SEE ALSO 

CANCEL
PAGE BREAK
PAGE SETUP
PRINT SETTINGS

 
ARTICLE USAGE

4D Language Reference ( 4D v12.4)
4D Language Reference ( 4D v11 SQL Release 6)
4D Language Reference ( 4D v14 R3)
4D Language Reference ( 4D v14 R2)
4D Language Reference ( 4D v13.5)
4D Language Reference ( 4D v14.3)
4D Language Reference ( 4D v14 R4)